الفرق بين Revit و AutoCAD وأهم Keyboard Shortcuts

Said A. Elshayeb/ يوليو 12, 2018/ دورة برنامج  Autodesk Revit مجاناً/ 0 comments

مشاركة المقال

الفرق بين Revit و AutoCAD وأهم Keyboard Shortcuts

في هذا الدرس نستعرض أهم مميزات برنامج Autodesk Revit  مقارنة ببرنامج AutoCAD الأكثر إستخداماً حالياً. يتضمن الدرس شرح عرض لأهم النقاط التي تميز البرنامج، من حيث سهولة إنشاء الللوحات الهندسية وحصر الكميات وتجهيز اللوحات للطباعة. يعد البرنامج من أهم البرامج المستخدمة بعلم الــ Building Information Modeling (BIM). عِلم الـ BIM بتعريفة البسيط هو محاكاة المعلومات الخاصة بالمبني من حيث أنواع الحوائط المستخدمة والأسقف والشبابيك بجانب المعلومات الخاصة بأعمال تكييف الهواء المركزي والتهوية HVAC. بيت المهندسين للتدريب والأستشارات يقدم دورات مخصصه في مجال HVAC – Fire Fighting System Design – Plumbing Design (يمكنك الإطلاع علي المحتوي العلمي والتسجيل من هنا).


أهم الأوامر المستخدمة ببرنامج Revit

AT AIR TERMINAL / Places a register, grille or diffuser.
CM PLACE A COMPONENT / Place a component.
CN CONDUIT / Draws a rigid conduit run.
CT CABLE TRAY / Draws a cable tray run.
CV CONVERT TO FLEX DUCT / Converts a section of rigid duct to flexible duct.
DA DUCT ACCESSORY / Adds duct accessories, such as dampers, in duct systems.
DF DUCT FITTING / Places duct fittings (elbows, tees, end caps, and so on) in duct systems.
DT DUCT / Draws ductwork in the building model.
EE ELECTRICAL EQUIPMENT / Places electrical equipment, such as panels and switch gear.
EW ARC WIRE / Draws an arced wire run.
FD FLEX DUCT / Draws flexible ductwork in the building model.
FP FLEX PIPE / Draws flexible pipes.
LF LIGHTING FIXTURE / Adds a lighting fixture element.
ME MECHANICAL EQUIPMENT / Places mechanical equipment such as boilers, furnaces or fans.
NF CONDUIT FITTING / Places conduit fittings.
PA PIPE ACCESSORY / Adds pipe accessories.
PF PIPE FITTING / Draws a pipe fitting in a piping system.
PI PIPE / Draws rigid piping.
PX PLUMBING FIXTURE / Places a plumbing fixture.
RP REFERENCE PLANE / Creates a reference plane using drawing tools.
SK SPRINKLER / Places a sprinkler
TF CABLE TRAY FITTING / Places cable tray fittings.

أهم الأوامر المستخدمة ببرنامج AutoCAD

Shortcut KeyDescription
ALT+F4Closes the application window
ALT+F8Displays the Macros dialog box (AutoCAD only)
ALT+F11Displays the Visual Basic Editor (AutoCAD only)
CTRL+F2Displays the Text window
CTRL+F4Closes the current drawing
CTRL+F6Moves to the next file tab
CTRL+0Toggles Clean Screen
CTRL+1Toggles Properties palette
CTRL+2Toggles DesignCenter
CTRL+3Toggles the Tool Palettes window
CTRL+4Toggles Sheet Set Manager
CTRL+6Toggles dbConnect Manager (AutoCAD only)
CTRL+7Toggles Markup Set Manager
CTRL+8Toggles the QuickCalc palette
CTRL+9Toggles the Command Line window
CTRL+ASelects all the objects in drawing that are not locked or frozen
CTRL+SHIFT+AToggles Groups
CTRL+BToggles Snap
CTRL+CCopies objects to the Windows Clipboard
CTRL+SHIFT+CCopies objects to the Windows Clipboard with Base Point
CTRL+DToggles Dynamic UCS (AutoCAD only)
CTRL+ECycles through isometric planes
CTRL+SHIFT+EEnables the use of implied faces and allow for the extrusion of a selected face
CTRL+FToggles running object snaps
CTRL+GToggles grid display mode
CTRL+HToggles PICKSTYLE
CTRL+SHIFT+HToggles the display of palettes with HIDEPALETTES and SHOWPALETTES
CTRL+IToggles the Coordinates display (AutoCAD only)
CTRL+SHIFT+IToggles Infer Constraints (AutoCAD only)
CTRL+JRepeats last command
CTRL+KInserts a hyperlink
CTRL+LToggles Ortho mode
CTRL+SHIFT+LSelects the previously selected objects
CTRL+MRepeats last command
CTRL+NCreates a new drawing
CTRL+OOpens an existing drawing
CTRL+PPlots the current drawing
CTRL+SHIFT+PToggles the Quick Properties interface
CTRL+QQuits the application
CTRL+RCycles through the tiled viewports on the Model tab or the floating viewports on the current named layout
CTRL+SSaves the current drawing
CTRL+SHIFT+SDisplays the Save As dialog box
CTRL+TToggles Tablet mode
CTRL+UToggles Polar Tracking
CTRL+VPastes data from the Windows Clipboard
CTRL+SHIFT+VPastes data from the Windows Clipboard as a Block
CTRL+WToggles selection cycling
CTRL+XCuts objects from the current drawing to the Windows Clipboard
CTRL+YCancels the preceding Undo action
CTRL+SHIFT+YToggles 3D Object Snap mode (AutoCAD only)
CTRL+ZReverses the last action
CTRL+[Cancels current command
CTRL+\Cancels current command
CTRL+HOMEMoves focus to the Start tab
CTRL+PAGE UPMoves to the previous layout
CTRL+PAGE DOWNMoves to the next layout tab
CTRL+TABMoves to the next file tab
F1Displays Help
F2Expands the Command Line history when the Command Line window is floating, or displays the Text window when the Command Line window is docked
F3Toggles OSNAP
F4Toggles 3DOSNAP (AutoCAD only) or Toggles TABMODE (AutoCAD LT only)
F5Toggles ISOPLANE
F6Toggles UCSDETECT (AutoCAD only)
F7Toggles GRIDMODE
F8Toggles ORTHOMODE
F9Toggles SNAPMODE
F10Toggles Polar Tracking
F11Toggles Object Snap Tracking
F12Toggles Dynamic Input
Shift+F1Subobject selection is not filtered (AutoCAD only)
Shift+F2Subobject selection is limited to vertices (AutoCAD only)
Shift+F3Subobject selection is limited to edges (AutoCAD only)
Shift+F4Subobject selection is limited to faces (AutoCAD only)
Shift+F5Subobject selection is limited to the solid history of an object (AutoCAD only)


الدورات المقدمة بيت المهندسين للتدريب والأستشارات


يمكنك مطالعة المقال التالي للتعرف أكثر عن الــ BIM

https://autode.sk/2NOSpSS

Share this Post

Leave a Comment